What did you do to your FL5 today?

[Xmetal]

Anyone rocking a rigid clutch pedal stop?

I just installed one I had in storage from some guy selling it from his part out. It feels great so far. A lot more satisfying clunk at the bottom of the clutch travel.

Anyone know if this is bad from the trans?


https://www.blackhawkjapan.com/products/rigid-aa1020-2

I wouldn't worry too much about it since the engagement point of our clutch is close to the middle or upper end of the travel. As long as you're not very close to the engagement point, you should be fine.

 

[Mrjustin81]

who says you go off roading in the R? ?

 

[TheFactor]

@NeRO_CTR Here you go buddy ??
This was just after about one day and I was really surprised how close the numbers were.
FL 25 1/2
FR 25 9/16
RL 25 9/16
RR 25 1/2
? Measured the best I could after a long night lol

 

[getRIGHT]

Installed WOT Performance hood struts tonight in under 10 minutes or less

 

[Toppyjai]

Because........... RACECAR spelled backwards is still spelled RACECAR!!! Installed a Defi-Link Advance control unit and turbo gauge. Ripped off the dash to wire the system for a clean install. I connected the Defi boost sensor onto the firewall inside the engine bay, on the passenger side. Wired the red power wire, the black ground wire, the orange ignition wire and the white illumination to the infotainment wires (that's the reason why the dash was removed). The wire that goes to the turbo gauge is on the Defi boost sensor, it was ran through the firewall and up behind the dash to the Defi control unit. The vacuum hose from the Defi boost sensor comes with a supplied T fitting. The T fitting is split from the manifold, one way goes to the boost sensor, the other way goes to the HKS BOV. Seeker cluster meter pods and hopefully more gauges in the future. Much of the install and inspiration goes to Kodawari.FK8's YouTube channel - ... because his gauge setup is so badass!!!

Reference pic of the what the Seeker pods look like........ RACECAR!!!!

These pics are from Kodawari.FK8's YouTube video, he wrapped his interior in Alcantara fabric - :

 

[TheFactor]

One Horsepower per Square inch claimed ? I just can’t do it to much bling ? Thought I’d make a little insert on the Air box ?

I’m afraid in time I’ll end up like him ?

 

[getRIGHT]

I pity da fool! ?

 

[NeRO_CTR]

^^ Looking good Shawn!

@NeRO_CTR Here you go buddy ??
This was just after about one day and I was really surprised how close the numbers were.
FL 25 1/2
FR 25 9/16
RL 25 9/16
RR 25 1/2
? Measured the best I could after a long night lol

I'll double check mine....I'm at 25 13/16 - 7/8. Started at 26.5

 

[TheFactor]

^^ Looking good Shawn!




I'll double check mine....I'm at 25 13/16 - 7/8. Started at 26.5

Cool , do you have the revised with the blue collar’s?
Settling in nicely

 

[TheFactor]

 

[SP R KiD]

Flat-Bottom Steering Wheel | 22+ Civic, 23+ Integra – Unity Performance

Just ordered the above steering wheel. Had a local tire shop mount and balance some tires and they damaged my steering wheel in the process (nice big scratch on the left side.) They honored the damaged and paid for the repairs. Got a shop to quote the fix for ~$1100 so I figured I could pick this up and pocket the change.

Any tips on wheel install? Looks pretty straightforward. My only concern is I've heard of people needing an alignment after install, but I don't think you should need an alignment if you align the wheel correctly, right? It doesn't make sense to me but I've seen enough people talk about it I figured I'd ask.

 

[Bazgab]

Flat-Bottom Steering Wheel | 22+ Civic, 23+ Integra – Unity Performance

Just ordered the above steering wheel. Had a local tire shop mount and balance some tires and they damaged my steering wheel in the process (nice big scratch on the left side.) They honored the damaged and paid for the repairs. Got a shop to quote the fix for ~$1100 so I figured I could pick this up and pocket the change.

Any tips on wheel install? Looks pretty straightforward. My only concern is I've heard of people needing an alignment after install, but I don't think you should need an alignment if you align the wheel correctly, right? It doesn't make sense to me but I've seen enough people talk about it I figured I'd ask.

Wheel install is super easy. The only tricky part is what you mentioned, make sure you get it on the right spline when reinstalling. No need for an alignment, plus not sure how that would help since there is no change to the suspension geometry.

Wish they had made it foolproof like in BMWs though. They have a keyed steering wheel spline so the wheel can only go on the correct spline.

 

[NeRO_CTR]

Cool , do you have the revised with the blue collar’s?
Settling in nicely

yes, they are the updated version with black insulators.

 

[evlsmurf]

Any tips on wheel install?

From videos I've watched, before actually pulling the wheel off, guys have put tape down to ensure it's lined up when putting it back on.

 

[getRIGHT]

^^ Looking good Shawn!

Thanks Joel!

Sponsored