OEM Oil Filter and Oil Drain Plug Crush Washer Part Number

[K20C1CTR]

What is the part number for the OEM oil filter and oil drain plug crush washer?

Based on my research, the part number should be the ones below. However, when I typed them in the official Honda OEM parts website, it said that the part numbers below do not fit my vehicle. Any advice? Thanks in advance.

Oil filter - 15400-PLM-A02
Oil drain plug crush washer - 94109-14000

Sponsored

 

[VWGUY]

I was told that all Hondas besides the S2000 use the sane filter.

 

[UCF120]

All Honda oil filters and drain plug washers are the same except for the s2000. I went to my local Honda dealer asking for a Type R oil filter the other day and that’s what they told me.

 

[K20C1CTR]

All Honda oil filters and drain plug washers are the same except for the s2000. I went to my local Honda dealer asking for a Type R oil filter the other day and that’s what they told me.

Thanks for confirming that.

 

[UJX]

Sorry for bumping this old thread but does anyone have a part number for the oil drain bolt?

Is it 90009-R70-A00?

 

[Chilly613]

Sorry for bumping this old thread but does anyone have a part number for the oil drain bolt?

Is it 90009-R70-A00?

Yes, that should be the correct part number. I think it may be closer to $10 on other sites. I just ended up spending a few more dollars and bought the magnetic drain bolt from Spoon.

 

[SRLWOR]

Can we run an S2000 filter on our cars?

 

[MC BumSlap]

Sorry for old bump. What is the correct PN for the Spoon magnetic drain bolt?

And why is the Spoon oil filter recommended?

I've used Purolator and/or Wix filters in almost all my vehicles and motorcycles for the last 20+ years.

 

[AspecR]

What is the part number for the OEM oil filter and oil drain plug crush washer?

Based on my research, the part number should be the ones below. However, when I typed them in the official Honda OEM parts website, it said that the part numbers below do not fit my vehicle. Any advice? Thanks in advance.

Oil filter - 15400-PLM-A02
Oil drain plug crush washer - 94109-14000

Use this part number for the oil filter instead, 15400-RTA-003, it is harder to find but it is a higher quality filter.

 

[MC BumSlap]

Use this part number for the oil filter instead, 15400-RTA-003, it is harder to find but it is a higher quality filter.

How so?

 

[AspecR]

How so?

it’s made by Mahle Japan with greater levels of QC, the other is cheaply made by Honeywell Fram

 

[MC BumSlap]

it’s made by Mahle Japan with greater levels of QC, the other is cheaply made by Honeywell Fram

Fram? F that then. Thanks for the part number. I found them on Amazon.

 

[PNEUMA]

Save your money, the type R comes from the factory with a magnetic oil drain plug

edit, no magnetic plug from factory. I forgot I previously installed one.

 

[ctechauto]

Save your money, the type R comes from the factory with a magnetic oil drain plug

They do not.

Highly recommend the Votex magnetic drain plugs. They are full stainless steel and the aluminum ones on the market tend to strip and eventually break even with careful torquing habits.

 

[blueroadster]

15400-PLM-01 oil filter made by FILTEC is the best of the bunch but good luck finding them. Your best option is to use the 02 or 03 filter and change it along with the oil every 3-5K miles.

Sponsored