🚀 tezzasaurusrex - Time Attack FL5 Build Journal

[hhkb]

A note on the Spoon spring spacers, I've now installed several sets of new release Spoon springs (now have thicker and higher quality black spring insulator on them) and have discovered they no longer sit low in the rear.

So for anyone who have the new release springs, you do not need the spacer I developed to raise the rear end.

If you have any questions feel free to respond here or send me a PM.

Thanks all

Thanks for the update! I was eyeing the Spoon springs.

 

[tezzasaurusrex]

Paragon rotors and Project Mu HC-CS pads fitted in prep for upcoming track day.

Initial impressions on street; lots of bite straight off the bat, hardly needed to bed the pads in to feel the bite. Seems I'm getting into ABS threshold with less pedal pressure. Will see how they behave on track. Got Elig Titanium shims behind the pads as well.

 

[Clark_Kent]

Paragon rotors and Project Mu HC-CS pads fitted in prep for upcoming track day.

Initial impressions on street; lots of bite straight off the bat, hardly needed to bed the pads in to feel the bite. Seems I'm getting into ABS threshold with less pedal pressure. Will see how they behave on track. Got Elig Titanium shims behind the pads as well.

Car is looking good!!

 

[kevinh]

Car looks amazing ?

 

[garettb16]

Loving your setup mate. And if I wasn’t in Melbourne I’d be coming to see you about my setup.
What are the specs on your new CE28s?

 

[tezzasaurusrex]

Car is looking good!!

Car looks amazing ?

Loving your setup mate. And if I wasn’t in Melbourne I’d be coming to see you about my setup.
What are the specs on your new CE28s?

Thanks all.

They're 18x9.5 ET42 CE28SL

 

[tezzasaurusrex]

Changed over to a HC20 (Odyssey PC680 equivalent) battery. Saved 9kg ~ 20lbs

Oh and 18x10 SAGA with 275/35R18 RE71RS fitted ready for track

 

[tezzasaurusrex]

God spec SAGA
18X10 ET40

 

[garettb16]

Stunning !

 

[tezzasaurusrex]

PB posted. But not entirely satisfied with the pace, track did feel a bit slow and greasy but the car felt great in terms of handling balance. The Tein coilovers are superb...

 

[PointByPatrol]

God spec SAGA
18X10 ET40

Are you still at factory ride height? Did you have to roll the fenders?

 

[tezzasaurusrex]

Are you still at factory ride height? Did you have to roll the fenders?

-25mm from factory
No fender work needed with enough camber and the right kind of camber

 

[Geraldfl5]

Changed over to a HC20 (Odyssey PC680 equivalent) battery. Saved 9kg ~ 20lbs

Oh and 18x10 SAGA with 275/35R18 RE71RS fitted ready for track

[/QUOTE

Changed over to a HC20 (Odyssey PC680 equivalent) battery. Saved 9kg ~ 20lbs

Oh and 18x10 SAGA with 275/35R18 RE71RS fitted ready for track

what battery hold down are u using

 

[Car00071]

-25mm from factory
No fender work needed with enough camber and the right kind of camber

How much camber front and rear? Which one was the issue?

 

[tezzasaurusrex]

what battery hold down are u using

Aeroflow but I had to modify the top brace quite significantly to make it work. There are better solutions out there where the brace goes long the width of the battery rather than down the length.