What did you do to your FL5 today?

[JDM_DOHC_SiR]

Did you get a good deal on the ITS exhaust?! That's quite the cash to burn for 'just the tip(s)'

Yes… got a fantastic deal on it have a buddy that works for Acura.
At retail price this would be absurd to do for sure…. But I did this for 2 reasons… the tips and the front resonator….. and well not to chop up my OEM CTR exhaust just to remove a front resonator.. let’s put it this way I was able to get this for about $100 more than what they are charging for the front resonator dealer kit and shipping.

Sponsored

 

[sashimi]

Yes… got a fantastic deal on it have a buddy that works for Acura.
At retail price this would be absurd to do for sure…. But I did this for 2 reasons… the tips and the front resonator….. and well not to chop up my OEM CTR exhaust just to remove a front resonator.. let’s put it this way I was able to get this for about $100 more than what they are charging for the front resonator dealer kit and shipping.

Okay you are probably the first to do this. What a legend. Please show pics after install!

 

[Tanabersx]

Bonoss 20mm spacers. Type R door sills.
PRL front strut bar. More to come!

 

[CTRAWR]

Installed RV6 downpipe. Car sounds a little bit better.

 

[MERAKIAUTOWORKS]

Bought one - Going to make a build thread.

 

[MrB]

Installed the CF centre console, wing and door sill trims next on the list!

 

[JDM_DOHC_SiR]

Got around to installing the modified Integra Type S exhaust on the CTR today.. sounds fantastic!!
One thing that I noticed is that the internal pipe DIA inside the muffler can were I could measure was 5mm larger than the CTR…
Also the rear muffler section has a different sub part number vice the CTR.. the CTR is a T20 the ITS is a T21
OEM CTR exhaust weights 54lbs the ITS exhaust weights 47lbs.

 

[DeathB4Dishonr]

Installed Awe Touring exhaust yesterday. Please excuse the dirty car, will be washed this weekend. Did some minor adjustments to align the tips better today as well.

 

[HRace]

Got around to installing the modified Integra Type S exhaust on the CTR today..

Thanks for the weight difference! Can you explain the highlights of what has to be done to the ITS exhaust to make it work? Just cut off the tips and move them forward in car to reduce the length they stick out from the cans? An OEM exhaust swap is interesting. Harness plug for the exhaust valve work no problem? Any more sound impressions? Thanks for testing this out for all of us.

 

[Tanabersx]

Installed the CF centre console, wing and door sill trims next on the list!

Are this red weave carbon? Where did you source this parts? Thanks!

 

[TW00Si]

Installed the CF centre console, wing and door sill trims next on the list!

Can you post the Honda part number for the door sills?

 

[JDM_DOHC_SiR]

Can you post the Honda part number for the door sills?

Carbon Door Sill Trims 08F05-T60-600

 

[MrB]

Are this red weave carbon? Where did you source this parts? Thanks!

Hi, yes red weave Honda parts. Sourced from Tegiwa, quite convenient for me being in the UK. In the UK, the "Carbon Pack" is a bundle of the wing, sill trims and centre console.

 

[albi]

What did you buy to plug the holes with??

They are actually furniture plugs. I bought several different license plate plugs and they all looked like crap.

https://www.amazon.com/Plastic-Lock...ocphy=9026815&hvtargid=pla-1728540531293&th=1

 

[FL5NOOB]

They are actually furniture plugs. I bought several different license plate plugs and they all looked like crap.

https://www.amazon.com/Plastic-Lock...ocphy=9026815&hvtargid=pla-1728540531293&th=1

Oh my..320 pieces! haha appreciate the link!

Sponsored