Official Wheel Fitment Thread for 11th Gen FL5 Civic Type R

[rondre3000]

just aesthetically. I saw a post earlier in this thread after reading back through where a guy seemed to have lot of poke, but the more searching I do the more this spec is the norm. As you said its the same outside fitment as the GS, and the 10.5 +47. I assume if I just have the pins pulled ill be fine.

thanks

Thats the thing...no one else can measure your tolerance for poke. I absolutely LOVE my set-up, but I know it makes others wanna dry heave.

Sponsored

 

[gotham]

Thats the thing...no one else can measure your tolerance for poke. I absolutely LOVE my set-up, but I know it makes others wanna dry heave.

I think its sick. How many degrees of camber are you running on the front being that aggressive?

 

[rondre3000]

I think its sick. How many degrees of camber are you running on the front being that aggressive?

Currently 2.25* all around (yes, it rubs in certain situations). Will be going to 2.75'ish after the holidays.

 

[System Motorsports]

That new-new.

Volk CE28N+ 18x10 +40 5x120 in Bronze. Ready to go! Much more unique and aggressive fitments comnig in 2026. Such as 18x10.5 +42 squared and 18x10 +40 in more wheel applications, along with 18x9.5 +33.

https://www.systemmotorsports.com/p...e-almite-set-of-4?_pos=3&_sid=9e27603d3&_ss=r

 

[specced]

That new-new.

Volk CE28N+ 18x10 +40 5x120 in Bronze. Ready to go! Much more unique and aggressive fitments comnig in 2026. Such as 18x10.5 +42 squared and 18x10 +40 in more wheel applications, along with 18x9.5 +33.

https://www.systemmotorsports.com/p...e-almite-set-of-4?_pos=3&_sid=9e27603d3&_ss=r

any chance we get the volk 21a in type r fitment.

 

[System Motorsports]

any chance we get the volk 21a in type r fitment.

We can do it! Offset will be close to low 30's though due to the design of the mold-form forged mold to begin with. It's difficult to make it a high ET without lip size suffering. We have done the BBS E88 on the FL5, FK8 and recently a DE5 with suitable lip size, if you like the mesh design. Same with the BBS LM / LMR but they require a spacer to clear the Brembos on these cars.

 

[NeRO_CTR]

any chance we get the volk 21a in type r fitment.

I originally wanted that wheel for the FL5. IMO, in our specs, the lip design and face options were unfavorable for the coin. Still excited to see someone go for it


Spoon Springs + God Spec 19's. after I get one of my classic project cars on the road for '26, I'll be positively making the move to coilovers.


Camber pin removed
No alignment
No camber kit
No abnormal tire wear

 

[gotham]

I originally wanted that wheel for the FL5. IMO, in our specs, the lip design and face options were unfavorable for the coin. Still excited to see someone go for it


Spoon Springs + God Spec 19's. after I get one of my classic project cars on the road for '26, I'll be positively making the move to coilovers.


Camber pin removed
No alignment
No camber kit
No abnormal tire wear

What tire size are you running?

 

[NeRO_CTR]

In that photo a r888R 265/35

 

[gotham]

In that photo a r888R 265/35

Wow im surprised that doesnt rub. That is some tight fitment. Looks killer

 

[ctechauto]

285/30/18 on 18x10 +40. Going 295/30 when they come back in stock from our supplier

 

[neilisnext]

Anyone running 18x10.5 +42 yet? I know Cleib's FL5 runs that but curious how much camber is needed front/back

 

[System Motorsports]

Anyone running 18x10.5 +42 yet? I know Cleib's FL5 runs that but curious how much camber is needed front/back

You will need about -3 degrees of camber, doable!

https://www.systemmotorsports.com/p...K_kU5j5VLGGiA9fMtVPWT2IjeQIhxwgjv9TjGqG5OMAuL

 

[SKINNIE]

Anyone running 18x10.5 +42 yet? I know Cleib's FL5 runs that but curious how much camber is needed front/back

here you go bro.

 

[neilisnext]

here you go bro.

-4 in the front whew ‍

Sponsored