Film on rear doors

[MKC]

I have two films on my rear doors and I don’t see them on other FL5s

My sales guy has no clue and he will check on it for me.

Are these from the factory? Are they supposed to be removed during PDI?

Sponsored

 

[Clark_Kent]

My vehicle was delivered with the same film on the rear doors.

 

[Icehawk]

They are delivered like that, some folks may remove/replace.

 

[DeVo]

OEM PPF. All come with it

 

[TypeRD]

I had the film too. It’s there to protect the car’s thick “hips” from debris being sprayed from the front tires. A lot of people are getting aftermarket PPF, in which case this film gets removed.

 

[lightningteg]

Can confirm this stuff does work

now I need to find a replacement. Honda dealer sold me wrong thing smh

 

[MoodySara]

Paint protector film.
My Ford truck had the same thing. It lasted very well for about 8 years on the truck.

 

[lightningteg]

If anyone knows if I can get just the door stickers somewhere let me know please. Otherwise I am going to have to go get a sheet and trace the outline and do it myself.

 

[Clark_Kent]

If anyone knows if I can get just the door stickers somewhere let me know please. Otherwise I am going to have to go get a sheet and trace the outline and do it myself.

What do you mean by "door stickers"?

 

[lightningteg]

What do you mean by "door stickers"?

The PPF in the picture above. The dealer sold me an “accessory” add on for the door handles and rear bumper and I can’t find any OEM part # for the door piece

 

[Clark_Kent]

The PPF in the picture above. The dealer sold me an “accessory” add on for the door handles and rear bumper and I can’t find any OEM part # for the door piece

It's not a sticker, it's film. I believe what you're looking for is below:

R. Rr. Door Protection
Part Number: 75890-T60-A00

L. Rr. Door Protection
Part Number: 75895-T60-A00

You will need to confirm those part numbers. I suggest skipping the OEM film because it is limited in its ability to prevent damage. That piece should be larger to cover more of the impact zone. Also, the OEM film will not age well. I recommend one of two things, 1) Buy bulk roll film and make the pieces yourself and apply it; or 2) Have a ppf installer make custom pieces for that section and have them install. It shouldn't cost more than $75 for both sides. Option #2 is the best path forward IMHO.

 

[lightningteg]

It's not a sticker, it's film. I believe what you're looking for is below:

R. Rr. Door Protection
Part Number: 75890-T60-A00

L. Rr. Door Protection
Part Number: 75895-T60-A00

You will need to confirm those part numbers. I suggest skipping the OEM film because it is limited in its ability to prevent damage. That piece should be larger to cover more of the impact zone. Also, the OEM film will not age well. I recommend one of two things, 1) Buy bulk roll film and make the pieces yourself and apply it; or 2) Have a ppf installer make custom pieces for that section and have them install. It shouldn't cost more than $75 for both sides. Option #2 is the best path forward IMHO.

Perfect thankyou

Sponsored