2023 Civic Type R Parked up in Championship White (California)

[007]

If you must, then you must, but generally I agree that wheel spacers should be avoided. Wheels with proper offsets and alignment under a dialed in suspension is the way to go.

Sponsored

 

[POPNTEC]

Am I the only one that thinks this is one of the nicest OEM wheels ever!?! At least Honda has never offered a nicer one that’s for sure.

 

[spyderdrifter]

Almost looks like there's a slight pearlescent sheen on the wheels. Could just be bad reflection.

 

[Toprarnen]

Almost looks like there's a slight pearlescent sheen on the wheels. Could just be bad reflection.

Or a good one ?

 

[007]

Am I the only one that thinks this is one of the nicest OEM wheels ever!?! At least Honda has never offered a nicer one that’s for sure.

Looks similar to the M3 CS wheel, which I thought was one of the best looking.

 

[Robert.C]

Split-5s are everywhere these days, and for good reason: it's a nice design that seems to suit everything.

 

[Tokyotexan]

It’s the best wheel ever made I put them on almost every car I own even my old 1991 GTI

Ehh... Played out for years now. Those 3 piece RPF'1's that enkei is releasing in a few months would look amazing on the CTR..

 

[Boostlag]

I love the RPF1, couldn't imaging putting on 800+ per wheel for multipiece forged ones. Think I'd go classic bronze TE37 if i splurged on a champ white car.

 

[Tokyotexan]

I love the RPF1, couldn't imaging putting on 800+ per wheel for multipiece forged ones. Think I'd go classic bronze TE37 if i splurged on a champ white car.

Rather spend 800 a piece for forged 3 piece wheels than 700 a piece for forged monoblock wheels. You can easily replace/repair a lip on a 3 piece wheel alot cheaper than having to replace a full monoblock wheel.
Plus the fact that the 3 piece RPF1's will stand out much more than a played out TE37 is just an added bonus.

 

[Toprarnen]

All the while I'm looking at Enkei TS-5s or TS-6s. Am I a pleb?

 

[Z3N]

Am I the only one that thinks this is one of the nicest OEM wheels ever!?! At least Honda has never offered a nicer one that’s for sure.

Not alone at all, hands down one of the best looking. Nixing the red stripe along the lip was the right choice for this design. ?

 

[Tokyotexan]

All the while I'm looking at Enkei TS-5s or TS-6s. Am I a pleb?

Why yes, yes you are

 

[tuhroo]

Ehh... Played out for years now. Those 3 piece RPF'1's that enkei is releasing in a few months would look amazing on the CTR..

No thanks, rpf1’s are a cool cheap auto X wheel, but I’d never spend big money on an Enkei. The one piece look better, the 3 piece look like some Vossen crap for a 240 or something rwd lol

 

[POPNTEC]

Not alone at all, hands down one of the best looking. Nixing the red stripe along the lip was the right choice for this design. ?

I’ve hated the red stripe look since it came on the scene. Especially through the aftermarket.

 

[Tokyotexan]

No thanks, rpf1’s are a cool cheap auto X wheel, but I’d never spend big money on an Enkei. The one piece look better, the 3 piece look like some Vossen crap for a 240 or something rwd lol

LMAO, you thinking the cast 1 piece RPF1's look better than the new forged 3 piece RPF1's perfectly explains why you think TE's are still relevant. ? ?

Sponsored