What did you do to your FL5 today?

[MR_O’s_DE5]

Hope you don’t mind me sharing but I had a busy weekend installing a tsp downpipe, PRL front pipe, PRL rear mount, hondata can flex, powder coated PRL front strut bar and PTP turbo and downpipe blankets this weekend on my de5.

Sponsored

 

[artsyfartsyFL5]

Hope you don’t mind me sharing but I had a busy weekend installing a tsp downpipe, PRL front pipe, PRL rear mount, hondata can flex, powder coated PRL front strut bar and PTP turbo and downpipe blankets this weekend on my de5.

Yeah, I'd say you've been busy, lol.

 

[Tougefl5]

Went through a full tank on the new blend. What a blast to drive.

 

[TheFactor]

Nice drive to the beach and some cold beverages

 

[Toppyjai]

Had the urge to install a pair of Baja Designs fog lights that I had sitting around for awhile. I wanted to put them in front of the intercooler but it wouldn't clear the bumper so I decided to drill into the top of the support brace to mount them behind the grill.

While I had the bumper off, decided to upgrade the stock horn with PIAAs. Be advised, theres 2 horns. 1 horn is located on the bottom passenger side by the washer fluid. The other horn is in front of the radiator brace.

 

[blueroadster]

Horns make sense but those particular fog lights on a CTR...Why?

 

[TheFactor]

Horns make sense but those particular fog lights on a CTR...Why?

Because he likes them as do I and very functional in the fog .

 

[MooMoo]

For all the fog NyC gets

 

[MooMoo]

Got the high wall mats last week. They are nice for sure but without a heel plate they will get destroyed in months (what was honda thinking?)

so i installed a cheap heel plate. Cheap, looks decent and will extend carpet life

 

[artsyfartsyFL5]

Got the high wall mats last week. They are nice for sure but without a heel plate they will get destroyed in months (what was honda thinking?)

so i installed a cheap heel plate. Cheap, looks decent and will extend carpet life

I like that heel plate. How'd you go about sourcing the material and installation?

 

[MooMoo]

I like that heel plate. How'd you go about sourcing the material and installation?

Cheap on amazon

https://amzn.to/3IbV766

Just drill 4 holes and screw it in the mat, takes 10 minutes at most

 

[artsyfartsyFL5]

Cheap on amazon

https://amzn.to/3IbV766

Just drill 4 holes and screw it in the mat, takes 10 minutes at most

Oh nice, thanks!

 

[TW00Si]

For all the fog NyC gets

But it’s a car. He can drive to places that gets foggy.

 

[MooMoo]

But it’s a car. He can drive to places that gets foggy.

haha sure.

I do like fog lights, they help but for the amount of fog we get a year seems like more work than its worth. Hopefully they are not too high and blinding on coming traffic

 

[Tougefl5]

Had the urge to install a pair of Baja Designs fog lights that I had sitting around for awhile. I wanted to put them in front of the intercooler but it wouldn't clear the bumper so I decided to drill into the top of the support brace to mount them behind the grill.

While I had the bumper off, decided to upgrade the stock horn with PIAAs. Be advised, theres 2 horns. 1 horn is located on the bottom passenger side by the washer fluid. The other horn is in front of the radiator brace.

I like the fog lights and have thought about getting some on my car. The added lights in the mountains are never a bad thing.