PRL Motorsports 1.5T Cold Air Intake Development / Pre-Order

[PRL Motorsports]

Thanks for the kind words and feedback everyone, we're glad these have been a hit!

What is dimensions of the box for this cobra intake and estimated weight? @PRL Motorsports

12x12x12" and 7 lbs.

Sponsored

 

[PRL Motorsports]

If Some people could Post up some good pics of the Cobra installed we would love to share them on our instagram page! or tag us in!

 

[elusiveaura]

If Some people could Post up some good pics of the Cobra installed we would love to share them on our instagram page! or tag us in!

 

[TranceFC1]

Any tips for removing the resonator?

 

[elusiveaura]

Ya, remove the metal skid plate underneath the car to get access to the bolts that hold the resonator in. Think there’s 2. Lot easier removing that plate. Don’t need to remove bumper either.

Any tips for removing the resonator?

 

[TranceFC1]

Ya, remove the metal skid plate underneath the car to get access to the bolts that hold the resonator in. Think there’s 2. Lot easier removing that plate. Don’t need to remove bumper either.

After you take out the bolts does it come out from the top or bottom? Getting all the info I can to install mine this weekend

 

[elusiveaura]

I pulled all mine out from top. Just have a little patience with it. Especially pulling out the top of air intake box from resonator. It’ll feel like you’re gonna break it but it’s attached really well with like a rubber grommet. After all bolts are out that you’ve removed you can pull the top half out but it took me some force.

After you take out the bolts does it come out from the top or bottom? Getting all the info I can to install mine this weekend

 

[360glitch]

If Some people could Post up some good pics of the Cobra installed we would love to share them on our instagram page! or tag us in!

Here are some photos of it installed in my Sport hatchback. I went with the Race MAF housing and am finishing up tuning for it. I have some benchmark testing (vs the OEM intake) planned and will follow up later with results. Early signs regarding a measurable street performance gain are looking good!

 

[davemarco]

@PRL Motorsports Any update on the upcoming Short Ram Intake? Very interested in checking it out!

 

[rushwal]

@PRL Motorsports can I install the CAI without any other modifications and run it with no problems or is it one of those "you can, but you should really get a tune" kind of things?

 

[jsanz]

@PRL Motorsports can I install the CAI without any other modifications and run it with no problems or is it one of those "you can, but you should really get a tune" kind of things?

No tune needed unless you get the race MAF option. However it’s a lot more fun with one! I can vouch!

 

[rushwal]

No tune needed unless you get the race MAF option. However it’s a lot more fun with one! I can vouch!

Thanks... Is it available with the red hose yet?

 

[SpeedyPro]

Anybody install this that has the Honda Sensing package? The radar sits next to the fog light on the left side, near where I'm seeing pictures of the filter sitting. I don't wanna try installing the intake and then realize it won't fit or force a radar malfunction.

 

[l15b7allturbo]

An option to race from street would be awesome. I would like to upgrade in the future

 

[Xtelotatichl]

What is the USDM Windsheild Washer Reservoir Conversion Kit for @prlmotorsports ? Why is it recommended as an option when trying to purchase the CAI? Same question for the Braided Stainless Steel Clutch Line Upgrade?

Sponsored