Stock exhaust: is there enough space to fit 3 4.5" tips

[Another Motorist]

https://www.amazon.com/gp/product/B0B87S8X96/ref=ewc_pr_img_1?smid=A3TYDC3FZVR30L

I've done a good amount of searching and have been looking for 4.5" single wall flat cut tips but double wall is all I could find. I'm looking to have the stock tips simply be cut off and these welded straight with no issues.

The problem could be that the > | | | triple pipe on the awe muffler is spaced perfectly for the 3 4.5" tips vs the stock muffler could be this > ||| and the 3 4.5" tips wont fit/crammed

Also looking to see FL5 on konig hypergrams

Sponsored

 

[gerryman81]

I have these double wall tips from amazon installed on my stock exhaust. I did this at the same time as my dual resonator delete and the shop was able to weld them on. Check my post on the rez delete for pics and a couple of my thoughts on it

 

[Another Motorist]

It looks like you did the 4" units and someone near end of thread did the 4.5"

 

[gerryman81]

you are right, looks like I did the 4" tips. I think there would still be enough space to do 4.5" tips but it might be tight. Just make sure you are using a good shop that knows what they are doing since they had to build a coupler to adapt the tips to the exhaust and make sure everything looks even.

 

[Another Motorist]

Hopefully, shall see eventually lol. Going with dual res delete + tips on the stock exhaust. I'm surprised the k20c1 doesn't make much power through the exhaust so likely going this route.

 

[AspecR]

I wonder how a 4.5" tip for the Center and 4" on either side would work

 

[Another Motorist]

still oOo haha maybe filled in a bit more. It'll definitely be eaiser to fit than 3 4.5"s

 

[Another Motorist]

https://www.magnaflow.com/products/...bon-fiber-cat-back-performance-exhaust-system

@AspecR This magnaflow is 4" for the sides and 4.5" for center

Update: Dual resonator delete and went with the 3 4.5" amazon tips.
I'm going to paint the inner tips black as it's like looking up some nostrils lol.
Seems that some exhaust like AWE and Remark use similar tip finishers