Search results

How is the NVH after the install?

I just ran MX72P pads yesterday morning. Dropped seconds in time. Night and day performance from the OEM pads. I think they're great amateur/starter pads. I'm planning to move up gradually on pad aggressiveness as I gain more seat time.

1. Removing the nuts off the DP studs without completely galling the threads. 2. Attempting to remove the studs for replacement (could never find a solution that didn't require a welder). Would love help/advice on how you did it. 3. Angling out and pulling the actual DP from the engine bay...

No cooling mods on my FL5. I saw between 275-285 oil temps in the middle of my session at H2R in Texas. Mid-90's with a slight breeze. If you're concerned about the engine, you can always get an oil analysis performed at a lab. It'll give you pretty solid info on metal wear, additives, &...

I recently added a PRL HVI, TSP DP, and PRL front pipe without a tune. Car doesn't throw any codes. It has a nice little idle and punchier throttle (& cool sound) at mid-range. I did an oil change prior and took a sample to Blackstone. I have a couple track days coming up plan to do another oil...

PRL HVI Installed

I got lucky and found a brand new one from the classifieds here.

1. I left the OEM studs - still had plenty of thread to work with. I ended up using the provided titanium nuts from TSP for now and torqued to 33 ft lbs. I will go back later and install the 2x OEM (90212-SA5-003) nuts again. 2. I used a drill bit to cut a small hole right next to the...

New Endless pads after obliterating the OEM's on a couple track days TSP Downpipe finally in. Huge PITA. PRL front pipe in. Super easy install. Fits like a glove.

I installed the TSP downpipe, but it took me much longer than I had hoped for. I ran through some problems during the install and was hoping to get clarity from people here. 1. I was lucky enough not to completely shear off the studs. That being said, I still galled a decent portion of the 2...

DM sent

This is a link to the cover: Footrest for Honda Civic TYPE R 2023+ FL5

Are these RF03RR's in gunmetal? They look great!

I see the thread still open. Are these still available?

You don't need to remove the grill trim. You can just have the plastic piece at the bottom still connected around the HVAC controls (shown below) and you'll just bend the plastic a bit. It'll be tight, but doable for sure. Wish I would've known before pulling it apart lol

Busy last weekend: Pumped-in exhaust audio delete Mugen shift knob & Acuity shift boot collar PRL Stage 1 kit Covered Footrest (don't mind the dirt) & a track day

Track Details: MSR Houston. 17 turns. 2.4 miles.54-70 degF and sunny. 2 track days with Driver's Edge. 4 15-minute sessions/day. Event is called Driver's Edge. Over the weekend, I took the FL5 for it's first track event. Zero mods - only a brake flush with Castrol SRF. Purposely did this to get...

Which wheels and spec are these? They look great with BB.

I can't believe I missed this deal :banghead: What a great price!

What color are these? I'm interested. @APEXRaceParts