Looking to upgrade Front BOSE separate component speakers

[OGGsr]

Hello all,

I recently purchased a set of Focal separate component speakers for the front doors in my '22 Si with the Bose stereo. My goal is to use the existing wiring harnesses and not cut and solder new wires for the Focals. I think I found connectors to use for the door mounted 6.5 mid woofer, but I'm pretty sure the A-pillar mounted tweeters use a different connector. Anyone have any insight? Here's the connector I think will work in the doors:

They are different than the 10th gen Civics. The Tweeter looks to use a smaller two-pin connector.

Thanks!

Jamie

Sponsored

 

[shaner89]

Hello all,

I recently purchased a set of Focal separate component speakers for the front doors in my '22 Si with the Bose stereo. My goal is to use the existing wiring harnesses and not cut and solder new wires for the Focals. I think I found connectors to use for the door mounted 6.5 mid woofer, but I'm pretty sure the A-pillar mounted tweeters use a different connector. Anyone have any insight? Here's the connector I think will work in the doors:

They are different than the 10th gen Civics. The Tweeter looks to use a smaller two-pin connector.

Thanks!

Jamie

How did you make out with this? Are you planning to run them from the stock amplifier?

 

[OGGsr]

I haven't installed them yet but will in the next few weeks. I'll post an update when I do.

 

[Snmtazz70]

Connector you posted is for the 6.5, but I cant find any for the tweeters, in which some were recommended but still did not fit.

I installed hertz tweeters with Audison mids. Coming up with a plan to bypass Bose amp and put in a DSP/Amp.

Sponsored