Search results

Yes I run these exact wheels:thumbsup: you will need aftermarket lugs the factory ones will not work, I used Project Kic’s on mine.

This foot light accessory adds an additional light that gets mounted under the front seats of the car as well as replacing the front ones that come with the car to a better LED light that is now tied into the dimer for the light control.

Will be interesting to see these results… the current off the shelf tunes should be rather close.. ( minus Hondata tune ) should see the differences possibly in the midrange but nothing more than a few hp and ftlbs +~- … now drive-ability might be something different and that’s what I want to...

:coffee: Going say ... we wont see this intake for at least 2-3 more months.... which is sad:doh: Lot's of communication at the beginning announcement of the testing ... now it's just delay after delay and zero updates.... I'm sure this will sell... but it's not the same PRL as in the past..:slap:

The tubing for the center tip once you cut the 5” off it slips right over the center section for the CTR exhaust perfectly and same with the outer tips as well. In the pictures I tack welded the tips until I was able to get the alignment perfect.. the. I fully welded the tips on.

Yes it’s 100% doable…. All the hangers line up perfectly the exhaust tips need to be shortened 5” but the nice part is Honda welded the tips on exhaust where it needs to be cut :thumbsup: also another nice benefit of the Type-S exhaust is the the internal Diameter of the muffler piping is larger...

I would say yea it is worth it since the lighting from under the seat is really night from the Angel that it comes out and is not obnoxious at all :coffee:

Sure… I can do that..:thumbsup:

Yes I did the install for the JDM foot lites about a year ago… wasn’t fun for sure:banghead: the kit comes with upgrade front lights that go in the factory locations and two the get mounted to the seat frame.. if you need help with the install or have questions I’ll be glad to help/ assist:thumbsup:

:rofl:

Do you have access to a RTA with the ability to play pink noise through the system :hmm: would be interesting to see how the curve of the system is.. I recall somebody testing the 10th gen system but nothing for the 11th gen system.. On a side not I have noticed similar finings to what you...

:hmm: The adaptors are incorrect? Maybe the sent the wrong ones.? Did you take a picture of them… would be interesting to see which ones they send.

Will be interesting to see what you can fit.... if some how you can come up with a way to keep the integrity of the panel and still find a way to make the larger midrange 4" work, then I'll definitely switch up to the 300M :thumbsup:

Perhaps :wave: https://mikstoreph.com/collections/civic-2022-interior-accessories/products/civic-2022-bose-center-and-pillar-speakers

I mean it could work but the 300M is 4" from center to center for the mount holes.. would require a bit of work but I wasn't willing to hack up the center channel speaker cover to make it work.. But there is another way :hmm:

This is what you will need for the Center Channel Speaker and Tweeters. I used this when I changed out my Center Channel Speaker to a Kappa 20MX I tried using the 300m but I ran into cone issues and surprisingly depth issues it would have required me to had the crap out of the panel .. so I just...

After roughly 9 weeks of waiting for the ITS Damper Module to come off back order … it finally shipped today :headbang: almost feels like I won the damn lottery:rofl: So for those of you that are looking to get them now might be the time to ping the system to get one.:coffee:

Strange…. :hmm: As in it’s not comfortable or …. It’s bouncy or…. Something else..

Little over $1000 for the OEM rear Alcantara covers and associated hardware.

This 100% :agree: