Recent content by LogicalCC

  1. Battery maintainer?

    are you connecting directly to the negative terminal on the battery with that? Or to metal on the car?
  2. Transmission magnetic drain plug

    I ended up using a Votex plug for my transmission and a bonoss plug for my oil pan. Quality and fitment was excellent. I have only put a few hundred miles on them, so don't know the longevity of them as of yet, but will keep an eye on it. Overall they seem to be some of the better options...
  3. WTB - TSP Downpipe for FL5

    Hi All, As the subject reads, I want to buy a TSP downpipe for my FL5. If anyone is selling one, please let me know. Thanks.
  4. Measurement of resonators?

    Take a look here https://www.civicxi.com/forum/threads/budget-exhaust-setup.60677/
  5. 🔴💊 Engine Oil Red Pill Thread: Only Post If You Have UOA - Official Honda Civic Type R K20C1 Engine Oil Analysis

    Hi All, Sharing my results for my first oil change and first lab analysis with Blackstone: Oil Brand and Viscosity - OEM (assuming Honda Ultimate 0W-20) Miles on Oil - 2,678 Track Use or Street Use (or mix) - Street Use Engine Temp Ranges Observed - Varied, but nothing above 220°F...so far...
  6. WTB - RV6 Frontpipe

    Hi All, As the subject indicates, looking for an RV6 frontpipe for my FL5. Thanks in advance.
  7. FL5 tuned with Hondata, no pops and bangs after PRL HVI install

    For those searching, I can confirm that just clearing the codes (via scan tool) in this type of situation will get the tune back without having to reflash. I had the same issue and even though the CEL was not lit on the dash, when i scanned it, the codes were showing up. I cleared them and then...
  8. JST FL5 goes back on the Dyno!

    Nice. Would you say that you are restricted much (or choking) by running the stock exhaust at such high hp? - based on your numbers, it seems that the exhaust is a non-issue for making power.
  9. JST FL5 goes back on the Dyno!

    Very nice numbers! What exhaust are you running?
  10. Transmission Magnetic Drain Bolt - What options?

    Thanks. These right? Also, do you know if OEM crush washers will still work or do we need these GReddy specific washers going forward?
  11. Transmission Magnetic Drain Bolt - What options?

    Good day gents and ladies, As the subject reads, what transmission magnetic drain bolts are you using, if any? There are many sites that claim they sell the bolt, but the sizing that they describe is not accurate to the actual transmission bolt size and pitch. Is it worth using a...
  12. Project Aero FL5 Front Lip Upgraded Hardware Kit

    Done. I just ordered it. I will DM you.




Top